View IE-703102-MC_1439482.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

users manual target device v850e/ms1 tm IE-703102-MC in-circuit emulator 1991 ? document no. u13875ej1v0um00 (1st edition) date published december 1998 n cp(k) printed in japan 1998
2 [memo]
3 v850e/ms1 and v800 series are trademarks of nec corporation. windows is either a trademark or a registered trademark of microsoft corporation in the united states and/or other countries. pc/at is a trademark of international business machines corporation. ethernet is a trademark of xerox corporation. unix is a registered trademark in the united states and other countries, licensed exclusively through x/open company limited. the information in this document is subject to change without notice. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec corporation. nec corporation assumes no responsibility for any errors which may appear in this document. nec corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. no license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec corporation or of others. m7a 96. 10
4 regional information some information contained in this document may vary from country to country. before using any nec product in your application, piease contact the nec office in your country to obtain a list of authorized representatives and distributors. they will verify: device availability ordering information product release schedule availability of related technical literature development environment specifications (for example, specifications for third-party tools and components, host computers, power plugs, ac supply voltages, and so forth) network requirements in addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary from country to country. nec electronics inc. (u.s.) santa clara, california tel: 408-588-6000 800-366-9782 fax: 408-588-6130 800-729-9288 nec electronics (germany) gmbh duesseldorf, germany tel: 0211-65 03 02 fax: 0211-65 03 490 nec electronics (uk) ltd. milton keynes, uk tel: 01908-691-133 fax: 01908-670-290 nec electronics italiana s.r.l. milano, italy tel: 02-66 75 41 fax: 02-66 75 42 99 nec electronics (germany) gmbh benelux office eindhoven, the netherlands tel: 040-2445845 fax: 040-2444580 nec electronics (france) s.a. velizy-villacoublay, france tel: 01-30-67 58 00 fax: 01-30-67 58 99 nec electronics (france) s.a. spain office madrid, spain tel: 01-504-2787 fax: 01-504-2860 nec electronics (germany) gmbh scandinavia office taeby, sweden tel: 08-63 80 820 fax: 08-63 80 388 nec electronics hong kong ltd. hong kong tel: 2886-9318 fax: 2886-9022/9044 nec electronics hong kong ltd. seoul branch seoul, korea tel: 02-528-0303 fax: 02-528-4411 nec electronics singapore pte. ltd. united square, singapore 1130 tel: 65-253-8311 fax: 65-250-3583 nec electronics taiwan ltd. taipei, taiwan tel: 02-2719-2377 fax: 02-2719-5951 nec do brasil s.a. electron devices division rodovia presidente dutra, km 214 07210-902-guarulhos-sp brasil tel: 55-11-6465-6810 fax: 55-11-6465-6829 j98. 11
5 introduction readers this manual is intended for users who design and develop application systems using v850e/ms1 tm products. purpose debugging can be performed efficiently with this emulator (IE-703102-MC) connected to a dedicated optional board when designing and developing application systems using v850e/ms1 products. the purpose of this manual is to describe the proper operation of the IE-703102-MC and its basic specifications. organization this manual is broadly divided into the following parts. ? overview ? names and functions of parts ? connections of parts how to read this manual it is assumed that the reader of this manual has general knowledge in the fields of electrical engineering, logic circuits, and microcontrollers. to learn about the basic specifications and operation ? read this manual in the order listed in contents . to learn the operation methods, command functions, etc., of the IE-703102-MC ? read the users manual of the debugger (optional) that is used. conventions note : footnote for item marked with note in the text caution : information requiring particular attention remark : supplementary information numeral representation: binary or b decimal ... hexadecimal ... h prefixes representing the powers of 2 (address space, memory capacity): k (kilo): 2 10 = 1024 m (mega): 2 20 = 1024 2 terminology the meanings of terms used in this manual listed below. target device device that is emulated. target system the system (user-built system) to be debugged. this includes the target program and hardware configured by the user. evaluation chip device that performs emulation of the target device in the IE-703102-MC.
6 related documents the related documents indicated in this publication may include preliminary versions. however, preliminary versions are not marked as such. { documents related to v850e/ms1 document name document number v850e/ms1 users manual - hardware u12688e v850e/ms1 user's manual - architecture u12197e m pd703100-40, 703101-33, 703102-33 data sheet to be prepared m pd703100-a40, 703101-a33, 703102-a33 data sheet to be prepared m pd70f3102-33 data sheet u13844e m pd70f3102-a33 data sheet u13845e { documents related to development tools (users manuals) product name document number IE-703102-MC (in-circuit emulator) this manual IE-703102-MC-em1, IE-703102-MC-em1-a (in-circuit emulator optional board) u13876e operation unix tm based u12839e operation windows tm based u12827e c language u12840e ca850 (c compiler package) assembly language u10543e id850 (integrated debugger) operation windows-based u13716e basics u13430e technical u13431e rx850 (real-time os) installation u13410e fundamental under preparation technical u13772e rx850 pro (real-time os) installation u13774e rd850 (task debugger) note u11158e rd850 (ver. 3.0) (task debugger) u13737e az850 (system performance analyzer) operation u11181e note supports id850 (ver. 1.31 only).
7 contents chapter 1 overview ......................................................................................................... .......... 9 1.1 hardware configuration...................................................................................................... .. 10 1.2 features.................................................................................................................... .............. 11 1.3 function specifications ..................................................................................................... ... 12 1.4 hardware configuration...................................................................................................... .. 13 1.5 system configuration ........................................................................................................ ... 14 1.6 contents in carton .......................................................................................................... ...... 15 1.7 setup....................................................................................................................... ................ 17 1.7.1 when using the IE-703102-MC on a stand-alone basis for performing software debugging ...... 17 1.7.2 when performing hardware debugging with target system ......................................................... 18 chapter 2 part names and function .............................................................................. 19 2.1 names and functions ......................................................................................................... .. 20 2.1.1 names and functions of main unit.......................................................................................... ..... 20 2.2 names and functions of pod part ....................................................................................... 21 chapter 3 connection of components .......................................................................... 23 3.1 connection to personal computer ...................................................................................... 23 3.1.1 overview of connection.................................................................................................... ........... 23 3.1.2 connection procedure...................................................................................................... ........... 23 3.1.3 personal computer setting ................................................................................................. ......... 28 3.1.4 connection of pc interface cable.......................................................................................... ...... 29 3.2 connection to target system .............................................................................................. 30 3.3 cable connections ........................................................................................................... ..... 32 3.3.1 connection of power adaptor ............................................................................................... ....... 32 3.3.2 pc interface cable connection ............................................................................................. ....... 32 3.3.3 external logic probe connection ........................................................................................... ....... 33 3.3.4 additional information.................................................................................................... .............. 33 3.4 system power-on and power-off ......................................................................................... 35 3.4.1 power-on procedure........................................................................................................ ............ 35 3.4.2 power-off procedure....................................................................................................... ............. 35 appendix dimensions.......................................................................................................... ........ 37
8 list of figures figure no. title page 1-1. basic hardware configuration............................................................................................... ............................13 1-2. system configuration ....................................................................................................... .................................14 1-3. contents in IE-703102-MC carton ............................................................................................ ........................15 1-4. accessories ................................................................................................................ .......................................16 2-1. IE-703102-MC ............................................................................................................... ....................................19 2-2. main unit .................................................................................................................. .........................................20 2-3. pod (top view)............................................................................................................. .....................................21 2-4. pod (bottom view).......................................................................................................... ...................................22 3-1. setting of dip switch 1 (sw1) (ie-70000-98-if-b)........................................................................... .................24 3-2. setting of dip switch 2 (sw2) (ie-70000-98-if-b)........................................................................... .................24 3-3. setting of dip switch 1 (sw1) (ie-70000-98-if-c) ........................................................................... ................25 3-4. setting of dip switch 2 (sw2) (ie-70000-98-if-c) ........................................................................... ................25 3-5. setting of dip switch 1 (sw1) (ie-70000-pc-if-b)........................................................................... ................26 3-6. setting of dip switch 2 (sw2) (ie-70000-pc-if-b)........................................................................... ................26 3-7. setting of dip switch 1 (sw1) (ie-70000-pc-if-c) ........................................................................... ...............27 3-8. setting of dip switch 2 (sw2) (ie-70000-pc-if-c) ........................................................................... ...............27 3-9. rear panel of pc-9800 series ............................................................................................... ...........................28 3-10. insertion of pc interface board ........................................................................................... ..............................28 3-11. connection of cable to pc interface board ................................................................................. .....................29 3-12. connection of connector for target connection and connector for emulator connection...............................30 3-13. pin 1 direction marking of connector (top view) ........................................................................... ..................30 3-14. connection of IE-703102-MC to target system............................................................................... .................31 3-15. power adaptor connection.................................................................................................. ..............................32 3-16. pc interface cable connection ............................................................................................. ............................32 3-17. external logic probe connection ........................................................................................... ...........................33 3-18. external logic probe connection (using ic clip)........................................................................... ...................34
9 chapter 1 overview the IE-703102-MC is an in-circuit emulator that efficiently debugs hardware and software of systems under development using v850e/ms1 products. it incorporates functions such as a break/trace function using events, a coverage function for program performance evaluation, and a timer/counter function. to perform debugging, the optional board (sold separately) corresponding to the relevant v850e/ms1 product must be connected.
chapter 1 overview 10 1.1 hardware configuration notes 1. for further information, contact daimaru kogyo., ltd. tokyo electronic components division (tel +81-3-3820-7112) osaka electronic components division (tel +81-6-244-6672) 2. these interface boards cannot be used for the pc98-nx series. optional board IE-703102-MC-em1 IE-703102-MC-em1-a the IE-703102-MC can be used as an in-circuit emulator of v850e/ms1 product by connecting these boards. extension probe (sc- sda note 1 ) general-purpose extension probe. product of tokyo eletech corporation. pc interface board ie-70000- -if-b ie-70000- -if-c ie-70000-pci-if ie-70000-cd-if-a these boards are used to connect the ie-703102- mc to personal computer. these boards are added into the expansion slot of a personal computer. : 98 (for pc-9800 series c bus) note 2 pc (for ibm pc/at tm compatible isa bus) note 2 ie-70000-pci-if : for pci bus ie-70000-cd-if-a : for pcmcia socket network module (ie-70000-mc-sv3) this module is used when workstation controls the IE-703102-MC via ethernet tm . power adaptor (ie-70000-mc-ps-b) ac adaptor dedicated to the nec in-circuit emulator. in-circuit emulator (IE-703102-MC) separately sold hardware
chapter 1 overview 11 1.2 features { maximum operation frequency of 40 mhz and operating voltage of 3.3 v (dc) are realized. { extremely lightweight and compact { higher equivalence with target device can be achieved by omitting buffer between signal cables. { following pins can be masked. reset, nmi, wait, hldrq { dimensions and environmental conditions for operation are as follows. parameter value maximum operating frequency 40 mhz supply voltage (dc) 5 v operating voltage (dc) v dd = 3.3 v, hv dd = 3.3/5.0v power dissipation 11 w (operating frequency: 40 mhz) note height 56 mm length 353 mm external dimensions (refer to appendix dimensions ) width 90 mm weight 500 g operating temperature range 0 to 40 c storage temperature range 0 to 45 c ambient humidity range 10 to 80%rh note the power dissipation is 11.4 w when the optional board is connected to the IE-703102-MC.
chapter 1 overview 12 1.3 function specifications item specification internal rom 512 kbytes emulation memory capacity external memory 2 mbytes internal rom 512 kbytes in rom-less mode 2 mbytes execution/pass detection coverage memory capacity external memory when using irom 1 mbyte memory access detection coverage memory capacity external memory 1 mbyte trace memory capacity 168 bits 32 kframes time measurement function measurement enabled with time tag or three timers 8-bit external trace possible external logic probe trace/break event setting possible event break step execution break forced break break function fail safe break ? illegal access to peripheral i/o ? access to guard space ? write into rom space caution some of the functions may not be supported depending on the debugger used.
chapter 1 overview 13 1.4 hardware configuration the basic hardware configuration of the IE-703102-MC is as follows. figure 1-1. basic hardware configuration evaluation chip (emulation cpu) mm1 #1 mm2 mm3 pod part trace memory main unit emulation memory pc data bus host machine i/o chip clk osc IE-703102-MC optional board extension probe target system irom memory board c0 coverage board access coverage board
chapter 1 overview 14 1.5 system configuration the system configuration when connecting the optional board to the IE-703102-MC, which is then connected to a personal computer (pc-9800 series or pc/at compatibles) is illustrated below. figure 1-2. system configuration remark <1> personal computer (pc-9800 series or pc/at compatibles) <2> debugger (sold separately) <3 > pc interface board (ie-70000-98-if-b/ie-70000-98-if-c, ie-70000-pc-if-b/ie-70000-pc-if-c: sold separately) <4> pc interface cable (included) <5> IE-703102-MC (in-circuit emulator) <6> optional board (sold separately) <7> external logic probe (included) <8> extension probe (sc- sd: sold separately) <9> connector for emulator connection (yqpack sd: included) <10> connector for target connection (nqpack sd: included) <11> power adaptor (ie-70000-mc-ps-b: sold separately) <12> ac100-v power cable (sold separately: included with ie-70000-mc-ps-b) <13> ac220-v power cable (sold separately: included with ie-70000-mc-ps-b) for pc-9800 series for pc/at [magnified drawing: example of use of connector for target connection] target system <12> <13> <11> <5> <6> <7> <4> <3> <1> <2> <8> <10> <9> target system <9> <10>
chapter 1 overview 15 1.6 contents in carton the carton of the IE-703102-MC contains a main unit, guarantee card, packing list, and accessory bag. make sure that the accessory bag includes this manual and cables. in case of missing or damaged contents, please contact an nec sales representative or an nec distributor. figure 1-3. contents in IE-703102-MC carton <2> accessory bag <3> guarantee card <4> packing list <1> IE-703102-MC <1> IE-703102-MC 1 <2> accessory bag 1 <3> guarantee card 1 <4> packing list 1
chapter 1 overview 16 check that the accessory bag contains this manual, an accessory list, and the following accessories. (a) pc interface cable 1 (b) external logic probe 1 (c) plastic spacer 2 (including 2 plastic screws and 2 washers) (d) connector for target connection (nqpack144sd) 1 (including 3 nqguides and 1 driver) (e) cpu mounting cover (hqpack144sd) 1 (including 4 fastening screws) (f) connector for emulator connection (yqpack144sd) 1 (including 4 yqguides) (g) nylon rivet 4 figure 1-4. accessories (a) pc interface cable (b) external logic probe (c) plastic spacer (d) connector for target connection nqpack144sd (side view) nqguide driver hqpack144sd (side view) (e) cpu mounting cover fastening screws (f) connector for emulator connection yqpack144sd (side view) yqguide (g) nylon rivet caution nqpack144sd, hqpack144sd, and yqpack144sd are intended for the laboratory use such as the program development and evaluation. do not use them for mass production.
chapter 1 overview 17 1.7 setup the following two system configurations for the IE-703102-MC are possible, depending on the purpose. this section describes the setup procedure according to each purpose as follows. step reference section 1.7.1 when using the IE-703102-MC on a stand-alone basis for performing software debugging (1) connect interface board to pc 3.1 connection to personal computer before connecting, make sure that the power of the pc is off. (2) connect optional board refer to the users manual of optional board (3) set clock operation mode of IE-703102-MC refer to the users manual of optional board crystal oscillator with 8 mhz is mounted at factory shipment. this crystal oscillator can be replaced with another oscillator with a frequency within the IE-703102-MC operating frequency range. (4) set cpu operating voltage range refer to the users manual of optional board switch cpu operating voltage range. (5) connect cables 3.3 cable connections connect power source adaptor and interface cable. (6) power up IE-703102-MC, then pc 3.4 system power-on and power-off
chapter 1 overview 18 1.7.2 when performing hardware debugging with target system caution before turning on the power of the target system, make sure that the power of the IE-703102-MC is turned on. if the target system is turned on while the IE-703102-MC is off, the target system or the ie-703102- mc may be damaged. (1) connect interface board to pc 3.1 connection to personal computer before connecting, make sure that the power of the pc is off. (2) connect optional board refer to the users manual of optional board (3) set clock operation mode IE-703102-MC refer to the users manual of optional board crystal oscillator with 8 mhz is mounted at factory shipment. this crystal oscillator can be replaced with another oscillator with a frequency within the IE-703102-MC operating frequency range. (4) set cpu operating voltage range refer to the users manual of optional board switch cpu operating voltage range. (5) connect cables 3.3 cable connections connect power source adaptor and interface cable. (6) connect IE-703102-MC to target system 3.2 connection to target system there are two connecting methods: connecting the connection tab of the optional board to the target system directly, and connecting the connection tab of the optional board to the target system via an extension probe (sold separately). (7) power up IE-703102-MC, then pc, then target system 3.4 system power-on and power-off
19 chapter 2 part names and function this chapter describes the name and function of each part of the IE-703102-MC, as well as switch settings. figure 2-1. IE-703102-MC pod main unit
chapter 2 part names and function 20 2.1 names and functions 2.1.1 names and functions of main unit figure 2-2. main unit (1) power switch this is the main power on/off switch of the IE-703102-MC. on/off is printed on the chassis of the main part. (2) power jack power adaptor (ie-70000-mc-ps-b: sold separately) is connected. (3) pc interface connector pc interface cable (included) is connected. (4) led on when the power is on, off when the power is off. pc interface connector power jack led power switch
chapter 2 part names and function 21 2.2 names and functions of pod part figure 2-3. pod (top view) evaluation chip trg gnd target (yellow) power (red) external logic connector l e d a1 a1 pin direction of evaluation chip gnd pin trg pin pin 1 direction of connector for target connection pld mm1 cn2 cn3 cn4 cn1 mm2 mm3 (1) trg pin trigger signal output pin (2) gnd pin gnd pin used during trigger signal output (3) external logic connector connects external logic probe (included). (4) led name led state description on power of target system = on target (yellow) off power of target system = off on power switch of main unit = on power (red) off power switch of main unit = off
chapter 2 part names and function 22 figure 2-4. pod (bottom view) pin 1 direction socket for optional board connection (1) socket for optional board connection pga socket to connect optional board (sold separately)
23 chapter 3 connection of components the IE-703102-MC enables debugging and programming of target devices by connecting several components and configuring a desired system. this chapter describes the various components and their connection. read this chapter when connecting system components. for the sequence of system configuration, refer to 1.7 setup . for the details on software start-up, refer to the users manual of the debugger that is used. 3.1 connection to personal computer 3.1.1 overview of connection the IE-703102-MC can use a personal computer (pc-9800 series or pc/at compatibles) as the host machine. the connection to each type of personal computer is described below. (1) pc-9800 series when using a pc-9800 series computer, insert the pc interface board (ie-70000-98-if-b or ie-70000-98-if-c: optional) in the external expansion slot in the pc-9800 series and connect the computer to the IE-703102-MC. (2) pc/at compatibles when using a pc/at compatible, insert the following pc interface board in the external expansion slot of the pc/at compatible and connect the computer to the IE-703102-MC. ie-70000-pc-if-b/ie-70000-pc-if-c : for isa bus ie-70000-pci-if : for pci bus (can also be used in pc98-nx series) (3) notebook-type personal computer when using a notebook-type personal computer, insert the pc card interface (ie-70000-cd-if-a: optional) in the pc card slot of the computer and connect the computer to the IE-703102-MC. 3.1.2 connection procedure (1) powering off perform connection while the power of each unit is off. if the power of the IE-703102-MC or the pc is on, turn off the power first. (2) pc interface board setting be sure to read the following section because the board settings differs depending on the board that is used.
chapter 3 connection of components 24 (a) ie-70000-98-if-b the i/o addresses are set with dip switch 1 (sw1) and dip switch 2 (sw2) on the pc interface board. sw1 and sw2 are the handshake bus address setting switches. set switches no. 1 to no. 8 of sw1 as shown in figure 3-1 and switches no. 5 to no. 8 of sw2 as shown in figure 3-2 (set 00d h address). set jp1 to no_use. figure 3-1. setting of dip switch 1 (sw1) (ie-70000-98-if-b) figure 3-2. setting of dip switch 2 (sw2) (ie-70000-98-if-b) allocate handshake bus for i/o addresses of pc (set high- order 8 bits among 16 bits of i/o address of pc). allocate handshake bus for i/o addresses of pc (set bits 7 to 4 of the i/o address of the pc). 8 7 6 5 off 4 3 2 1 a15 a14 a13 a12 a10 a9 a8 a11 sw1 8 7 6 5 off 4 3 2 1 a7 a6 a5 a4 sw2 reserved (switches no. 4 to 1 are fixed as shown)
chapter 3 connection of components 25 (b) ie-70000-98-if-c the i/o addresses are set with dip switch 1 (sw1) and dip switch 2 (sw2) on the pc interface board. sw1 and sw2 are the handshake bus address setting switches. set switches no. 1 to no. 8 of sw1 as shown in figure 3-3 and switches no. 5 to no. 8 of sw2 as shown in figure 3-4 (set 00d h address). set int jp to no_use and wait jp to the short between 2 and 3. figure 3-3. setting of dip switch 1 (sw1) (ie-70000-98-if-c) figure 3-4. setting of dip switch 2 (sw2) (ie-70000-98-if-c) allocate handshake bus for i/o addresses of pc (set bits 11 to 4 of i/o address of pc). reserved (switches no. 5 to 8 are fixed as shown) allocate handshake bus for i/o addresses of pc (set bits 15 to 12 of the i/o address of pc). on 8 7 6 5 4 3 2 1 a11 a10 a9 a8 a6 a5 a4 a7 sw1 on 8 7 6 5 4 3 2 1 a15 a14 a13 a12 sw2
chapter 3 connection of components 26 (c) ie-70000-pc-if-b the i/o addresses are set with dip switch 1 (sw1) and dip switch 2 (sw2) on the pc interface board. sw1 and sw2 are setting switches of the handshake bus address. set switches no. 1 to no. 8 of sw1 as shown in figure 3-5 and switches no. 1 to no. 4 of sw2 as shown in figure 3-6 (set 022 h address). set jp1 to no_use. figure 3-5. setting of dip switch 1 (sw1) (ie-70000-pc-if-b) figure 3-6. setting of dip switch 2 (sw2) (ie-70000-pc-if-b) allocate handshake bus for i/o addresses of pc (set high-order 8 bits among 16-bits of i/o address of pc). allocate handshake bus for i/o addresses of pc (set bits 7 to 4 of the i/o address of pc). 8 7 6 5 off 4 3 2 1 a15 a14 a13 a12 a10 a9 a8 a11 sw1 off 4 3 2 1 a7 a6 a5 a4 sw2
chapter 3 connection of components 27 (d) ie-70000-pc-if-c the i/o addresses are set with dip switch 1 (sw1) and dip switch 2 (sw2) on the pc interface board. sw1 and sw2 are setting switches of the handshake bus address. set switches no. 1 to no. 8 of sw1 as shown in figure 3-7 and switches no. 1 to no. 4 of sw2 as shown in figure 3-8 (set 022 h address). set int jp to no_use and wait jp to the short between 2 and 3. figure 3-7. setting of dip switch 1 (sw1) (ie-70000-pc-if-c) figure 3-8. setting of dip switch 2 (sw2) (ie-70000-pc-if-c) allocate handshake bus for i/o addresses of pc (set bits 15 to 12 of i/o address of pc). reserved (switches no.5 to 8 are fixed as shown) on 8 7 6 5 4 3 2 1 a11 a10 a9 a8 a6 a5 a4 a7 sw1 on 8 7 6 5 4 3 2 1 a15 a14 a13 a12 sw2 allocate handshake bus for i/o addresses of pc (set bits 11 to 4 of i/o address of pc).
chapter 3 connection of components 28 3.1.3 personal computer setting this section describes how to set and connect the interface board to the pc-9800 series computer add-on slot. also refer to this section when connecting a pc/at compatible. (a) make sure that the pc-9800 series power is off before starting installation. (b) remove the cover of the add-on slot bus on the rear panel of the pc. figure 3-9. rear panel of pc-9800 series (c) insert the pc interface board. (d) fasten the pc interface board with screws. figure 3-10. insertion of pc interface board remove the cover fasten screws
chapter 3 connection of components 29 3.1.4 connection of pc interface cable connect the pc interface cable to the interface board connector. figure 3-11 illustrates how to connect the pc interface cable. caution connect to ch1 connector when using ie-70000- -if-c. figure 3-11. connection of cable to pc interface board connector pc interface cable
chapter 3 connection of components 30 3.2 connection to target system there are two connecting methods: connecting the connection tab of the optional board to the target system directly and connecting the connection tab of the optional board to the target system via an extension probe (optional). (1) attach the connector for target connection (nqpack sd) and the connector for emulator connection (yqpack sd) to the target system. figure 3-12. connection of connector for target connection and connector for emulator connection caution connector for target connection (nqpackxxxsd) has pin 1 direction marking. refer to figure 3-13. figure 3-13. pin 1 direction marking of connector (top view) screws provided with yqpackxxxsd (yqguide) connector for emulator connection (yqpackxxxsd) connector for target connection (nqpackxxxsd) <1> fix with solder at proper position <2> insert <3> fix with screws (yqguide) <1> <2> <3> <3> target system pin 1 direction connection tab of the optional board connector for target connection (nqpackxxxsd)
chapter 3 connection of components 31 (2) connect the connection tab of the optional board to the target system directly or via the extension probe. in either case, make sure that the pin 1 position (cutout corner of connector) is aligned. the connection procedure is as follows. caution be careful not to break or bend the pins of connector, socket, and extension probe when connecting. (a) when connecting to target system directly <1> turn off the power of the IE-703102-MC (power switch off). <2> connect the IE-703102-MC to the optional board. <3> connect the connection tab of the optional board to the target system. (b) when connecting to target system via extension probe <1> turn off the power of the IE-703102-MC (power switch off). <2> connect the IE-703102-MC to the optional board. <3> connect the extension probe to the optional board. <4> connect the top of the extension probe to the target system. figure 3-14. connection of IE-703102-MC to target system when using extension probe when directly connecting target system target system
chapter 3 connection of components 32 3.3 cable connections 3.3.1 connection of power adaptor insert the cable of the power supply adaptor (ie-70000-mc-ps-b: optional) to the power jack of the IE-703102-MC main part. caution use only the ie-70000-mc-ps-b for power supply. use of other power supplies may damage the IE-703102-MC due to different power jack polarity and voltage. figure 3-15. power adaptor connection 3.3.2 pc interface cable connection connect the pc interface cable to the 36-pin connector of the IE-703102-MC. figure 3-16. pc interface cable connection power jack power adapter (ie-70000-mc-ps-b) pc interface connector pc interface cable
chapter 3 connection of components 33 3.3.3 external logic probe connection when using the external logic probe, connect to the 9-pin connector in the IE-703102-MC main unit. figure 3-17. external logic probe connection 3.3.4 additional information the IE-703102-MC can perform real-time tracing of the evaluation chip bus cycle. in addition, external logic probes are provided for the following three functions. for details on their use, refer to the debugger users manual. (1) any eight signals can be traced in real-time. (2) tracer start/stop is enabled using any eight signals. (3) break setting is enabled using any eight signals. cautions 1. connect the external logic probe only to a ttl-level signal line. the high level and low level cannot be detected correctly if connected to lines other than ttl-level signal lines. furthermore, the sensor of the IE-703102-MC may damage by an excessive voltage level. 2. when connecting the external logic probe, use commercially available ic clips. procedure (1) turn off the power of the target system. (2) turn off the power of the IE-703102-MC. (3) attach ic clips to a device on the target system. (4) connect the external logic probe to the included ic clips. (5) connect the gnd of the external logic probe to the gnd of the target system. external logic connector external logic probe
chapter 3 connection of components 34 figure 3-18. external logic probe connection (using ic clip) target system external logic probe ic clip
chapter 3 connection of components 35 3.4 system power-on and power-off after the connection of the IE-703102-MC and each system component (pc, target system, etc.), start up and end the system using the following. 3.4.1 power-on procedure cautions 1. make sure that the IE-703102-MC is correctly connected to the pc. 2. in case the IE-703102-MC is powered on using a procedure other than the following one, the ie- 703102-mc or the target system may be damaged. (1) turn on the power switch of the IE-703102-MC. set the power switch to on after connecting the power adaptor to the power jack of the IE-703102-MC and the plug to the power outlet. (2) turn on the power switch of the pc. (3) turn on the power of the target system. (4) start the debugger. 3.4.2 power-off procedure (1) terminate the debugger. (2) turn off the power switch of the target system. (3) turn off the power switch of the pc. (4) turn off the power switch of the IE-703102-MC.
36 [memo]
37 appendix dimensions (unit: mm) 353 55 166 58.8 56 90 27 132 top view side view bottom view 75
38 [memo]
although nec has taken all possible steps to ensure that the documentation supplied to our customers is complete, bug free and up-to-date, we readily accept that errors may occur. despite all the care and precautions we've taken, you may encounter problems in the documentation. please complete this form whenever you'd like to report errors or suggest improvements to us. hong kong, philippines, oceania nec electronics hong kong ltd. fax: +852-2886-9022/9044 korea nec electronics hong kong ltd. seoul branch fax: 02-528-4411 taiwan nec electronics taiwan ltd. fax: 02-2719-5951 address north america nec electronics inc. corporate communications dept. fax: 1-800-729-9288 1-408-588-6130 europe nec electronics (europe) gmbh technical documentation dept. fax: +49-211-6503-274 south america nec do brasil s.a. fax: +55-11-6465-6829 asian nations except philippines nec electronics singapore pte. ltd. fax: +65-250-3583 japan nec semiconductor technical hotline fax: 044-548-7900 i would like to report the following error/make the following suggestion: document title: document number: page number: thank you for your kind support. if possible, please fax the referenced page or drawing. excellent good acceptable poor document rating clarity technical accuracy organization cs 98.8 name company from: tel. fax facsimile message

▲Up To Search▲

Price & Availability of IE-703102-MC

	To Download IE-703102-MC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .